Before initiating the software upgrade, ensure the following conditions are met to avoid "bricking" the device: Power Supply:
to prevent the device from losing power during the flash process. Upgrade Procedure (Step-by-Step) Load the Firmware Satlink Ws-6979 Software Upgrade
Satlink WS-6979SE Digital Satellite Finder Meter User Manual Before initiating the software upgrade, ensure the following
Plug the USB flash drive into the USB port located on the side or bottom of your WS-6979 unit. Access the Menu: Power on the device and press the Navigate to Settings: Use the arrow keys to find the sub-menu, then look for an option labeled Software Upgrade USB Upgrade Select the File: This clears any residual config data from the old firmware
After a successful upgrade, perform a factory reset (Menu → System → Factory Default) and then manually re-enter your preferred LNB settings. This clears any residual config data from the old firmware.
The device will typically restart automatically once the installation is complete. Crucial Precautions