| After each use | Weekly | Monthly | |----------------|--------|---------| | Disassemble fully | Check gear grease (food-grade, NLGI 2) | Inspect auger for wear grooves | | Hand-wash in warm soapy water – (caustic soda dulls blades) | Tighten all screws on the mounting yokes | Sharpen or replace blade (20–30 hours of use) | | Dry immediately with a towel then low-heat oven 5 min | Lubricate the crank handle bushing with mineral oil | Test retaining ring threads – replace if stripped | | Apply a light coat of food-grade mineral oil to iron parts | Run a nylon brush through plate holes | Re-calibrate the gear mesh (adjust eccentric bearing) |
Slide the cutting knife onto the end of the auger. Crucial: The flat, sharpened side of the blade must face outward toward the grinding plate. seccom technologies 081 manual meat
The cross blade must have the and the recessed side toward the auger. Reverse assembly will dull the blade in 3 rotations and spit metal shavings into the meat. | After each use | Weekly | Monthly
The Seccom Technologies 081 is a utility device designed to automate the power supply to appliances based on a pre-set schedule. It is commonly used in both domestic and industrial settings to manage energy consumption. Reverse assembly will dull the blade in 3