Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022 Patched «Limited»

Output should show the S100i controller, RAID level, and physical drive status.

The system will load the driver, and after a few seconds, your configured logical RAID volume(s) should appear. Output should show the S100i controller, RAID level,

: The driver is not included in standard Windows Server media. It must be manually injected during OS installation via USB or automatically added using HPE Intelligent Provisioning . Output should show the S100i controller

Because it is a driver-based solution, Windows Server 2022 won't "see" any configured logical drives during installation unless you manually provide the driver. and after a few seconds

Before beginning, please note the following critical points regarding the S100i controller:

Run (after installing HPE SSACLI):