G2110 Verified Extra Quality - Resetear Impresora Canon

Only reset the counter if you have physically cleaned or replaced the waste ink pad, or if the printer is relatively new and the error appeared prematurely.

and clear the "Ink Absorber Full" (Error 5B00) or other system errors, you must enter and then execute the reset command manually . Step 1: Enter Service Mode Ensure the printer is turned off but connected to power. Press and hold the Power button. resetear impresora canon g2110 verified

A reset using the Service Tool v.4900 works permanently until the pad fills up again, which typically takes 6–18 months depending on usage. When the error returns, simply repeat the reset process. However, after the second or third reset, you must physically clean the pad to avoid leaking. Only reset the counter if you have physically

| Problem | Solution | |---------|----------| | | Use ST4900, ST5200, or ST4720. Version 4000 does not support G2110. | | Printer not in Service Mode | Repeat the button sequence slowly. The green LED should flash in a pattern, not stay solid. | | Driver issue | Install the official Canon G2110 driver before using the tool. | | USB connection problem | Try a different USB port, cable, or restart PC. | | Real physical overflow | If ink has leaked into the printer bottom, you must physically replace or wash the waste ink pads before resetting. | Press and hold the Power button

Asegúrate de que la impresora esté conectada a la corriente pero Mantén presionado el botón Parar/Stop (triángulo rojo).

Confirm by selecting and pressing OK . The machine will initialize for about a minute. Quick Fix: Resetting Ink Warnings