Disclaimer: Motorola, MOTOTRBO, and DP1400 are trademarks of Motorola Solutions, Inc. This article is for informational purposes and is not an official Motorola publication. Always consult a Motorola authorized dealer for complex programming issues.
| Symptom | Likely Cause | Solution | | :--- | :--- | :--- | | "Radio not recognized" | Wrong CPS version (e.g., CPS 16) | Install CPS 2.0 or 8.0–10.0 | | "Codeplug too new" | Radio has newer firmware than CPS supports | Downgrade radio firmware (dealer only) or find newer CPS 2.x build | | "Communication timeout" | USB driver conflict | Install legacy Windows driver for Prolific/FTDI chip | | Radio powers off during read/write | Low battery or poor cable connection | Use fully charged IMPRES battery; reseat cable | motorola dp1400 software
Why do you need the software? The front buttons on a DP1400 only offer basic volume and channel changes. The software unlocks the engineering toolkit. With the correct Motorola DP1400 software, you can configure: Disclaimer: Motorola, MOTOTRBO, and DP1400 are trademarks of
Motorola Solutions does not freely distribute CPS for the DP1400. It is proprietary software. You have three legal avenues: | Symptom | Likely Cause | Solution |